Rotary Cutters | RC8M Rotary Cutter

Features

What is the best cutter for your job?

NOTE: Only for single spindle and multi-spindle.

John Deere rotary cutters lead the way with innovative design, superior performance, and proven durability. Valuable features such as the Double-Decker™ design and Max Flow cutting chamber prevent water and debris from accumulating on the smooth, dome-shaped top deck while the flat bottom deck absorbs the punishment from rocks and stumps.

The top deck stays smooth - no dents, no dings, no holes. The internal supports sandwiched between the top and bottom decks are key to the smooth and structure-free Max Flow cutting chamber, while at the same time provide added strength and durability.

To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields. John Deere rotary cutters continue to advance in value with powerful gearboxes, blade holders, and compatibility with a wide range of tractors.

Here are situations when a rotary cutter provides value:

Clipping pastures encourages grass growth, optimizing valuable pasture acreage.
Cutting grass and stalks helps control insects.
Routine cutting keeps weeds from reseeding.
It is the most cost efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
Cutting grass waterways encourages root development and helps prevent erosion.
Knocking down stalks such as cotton, corn, or milo speeds up decomposition. This is essential in no-till and minimum-till fields.
Clearing out brush.
Control undergrowth and grass in orchards, vineyards, and groves.

Decide what model to use based on:

The size of the area to mow versus the size of the machine – the bigger the area to mow, the bigger the mower needs to be in order to be efficient during mowing hours. Similarly, the limitation of a small area will guide operators to use a smaller mower.
The amount of time and frequency it will be used – for longer hours and more frequency, choose a heavier duty machine.
Tractor compatibility – if there is a tractor the operator will be using, look for the tractor compatibility sheet to identify appropriate options.

John Deere rotary cutters are available in two duty-level categories:

Mid-duty
- RC M models are available in 1.5-m (5-ft), 1.8-m (6-ft), 2.1-m (7-ft), 2.5-m (8-ft), and 3.2-m (10-ft).
- This duty-level category cuts brush up to 50.8 mm (2 in.) in diameter.
Heavy-duty
- RC R models are available in 3.2-m (10-ft) and 4.2-m (14-ft).
- This duty-level category cuts brush up to 76.2 mm (3 in.) in diameter.
- RC6R is available in 1.8-m (6-ft) and the RC7R is available in 2.1-m (7-ft) cut widths; they cut brush up to 101.6 mm (4 in.) in diameter.

NOTE: R Series are heavier built to cut at a 101.6 mm (4 in.) capacity level more frequently and for longer durations.

Double-Decker™ frame design

Cross-section of patented Double-Decker design

The Double-Decker design provides strength and superior cutting performance while reducing top deck rust. Two welded decks, each 3-mm (1/8-in.) thick, form the upper and lower surfaces of the rotary cutter frame.

Internal stiffeners are sandwiched between the two decks, providing superior strength and rigidity.

The top deck is domed. Water, grass, and crop debris tend to roll off the deck, reducing water buildup and deck rust. The domed shape and smooth profile of the top deck also make the deck easier to clean when trash does build up in adverse conditions.

Unobstructed horizontal bottom deck

The bottom deck is the main defense against rocks and field debris. Therefore, the top deck is continuously protected from impacts and tends to retain its smooth form.

Because the stiffeners are located between the two decks, the underside of the bottom deck is perfectly smooth; there are no structural frame members to interrupt airflow. This improves both cutting performance and distribution.

Standard material flow deflectors help channel the cut material, further improving material distribution.

Driveline with slip clutch helps protect it against overloads

Rubber element driveline with chain couplers

Rubber element connecting drivelines help absorb the sudden stress of impact loads. Chain couplers are used to maintain the driveline alignment.

Slip-clutch driveline

A non-seize slip clutch used between the primary gearcase and power take-off (PTO) helps protect the driveline. Slip clutches feature a spring-compression adjustment used to ensure clutches are not seized.

Lift-type and semi-mount models feature an ASAE Category 4 driveline for added durability.

Equal-angle driveline

The pull-type model uses an equal-angle driveline for smoother, rattle-free turns.

A lightweight driveline with a lock-slide collar makes it fast and easy to attach.

The driveline provides long lubrication periods; a 50-hour cycle reduces maintenance time, making the cutting operation more efficient.

Safety chain shields are standard

Front safety chains (RC8M shown)

Rear safety chains (RC8M shown)

Front and rear chain shields are standard equipment:

Offer protection during operation yet allow uncut material to pass into the cutting chamber with minimal restriction

Standard stump jumper blade holder provides protection against impacts

Round-pan blade holders (stump jumpers) are provided as standard equipment on most John Deere rotary cutter models. Stump jumpers increase the drivetrain reliability by providing protection against impacts such as stumps, rocks, and other obstacles.

Warranty

Five-year limited gearbox warranty provided on every John Deere rotary cutter

Five-year warranty on all flex-wing gearboxes

Five-year warranty on all rotary cutter gearboxes

John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.

There is also 1-year warranty on the complete machine, including drivelines, clutches, and many other components.

Show More Show Less

Specs & Compare

Select up to 4 models to compare specifications

John Deere

RC8M

Rotary Cutter

Cutting width

2,450 mm
96 in.

Cutting height

25 to 305 mm
1 to 12 in.

Cutting capacity

50 mm
2 in.

Cutting chamber Depth

216 mm
8.5 in.

Tractor PTO HP range

Minimum PTO pull-type, semi-mount, semi-mount hydraulic offset 30 kW
40 hp
Minium PTO lift-type 37 kW
50 hp

Tractor PTO

540 rpm

Type

Pull-type, lift-type, semi-mount, semi-mount hydraulic offset (Pull-type has standard 10,000 lb; 4536 kg, safety tow chain)

Date collected

3.9% APR fixed rate for 24 months†

on New John Deere Rotary Cutters

†For complete details regarding this offer, please select the corresponding link below.

View Offer Details

Up To 20% OFF Rotary Cutter Blades†

for various rotary cutter models.

†For complete details regarding this offer, please select the corresponding link below.

View Offer Details

12% OFF Select Attachments†

for Round Balers & Rotary Cutters

†For complete details regarding this offer, please select the corresponding link below.

View Offer Details

Show More Show Less

Transport width	2,580 mm 102 in.
Overall width	2,580 mm 102 in.
Overall length	2,810 mm 111 in.
Deck shape	Domed
Deck type	Double decker
Deck thickness	Upper 3 (11) mm 0.125 (11) in. Lower 3 (11) mm 0.125 (11) in.
Side skirt thickness	4.5 (7) mm 0.177 (7) in.
Approx. weight	759 kg 1,670 lb

Size	Main ASAE Category 4
Protection	Main Non-seize, slip-clutch driveline, pull-type has equal-angle Category 4 driveline Connecting Shock absorbing shafts

Thickness	13 mm 0.5 in.
Width	102 mm 4 in.
Type	Suction
Overlap	72 mm 2.8 in.
Blade tip speed	540 RPM 4,797 m/min 15,739 fpm 288 km/h 179 mph
Material flow system	Max flow
Holder	Type Round stump jumper

Type	Puncture proof laminated (Pull-type has severe-duty Ag tire option)
Row width adjustment	Yes, pull-type only

Blade tip speed - 540 rpm
Cutting capacity
Cutting width
Deck thickness - Upper - Lower
Drivelines - Size - Main
Hitch - Category
Protection - Main
Shielding - front/rear
Side skirt thickness
Tractor PTO HP range

RC8MRotary Cutter

Features

What is the best cutter for your job?

Double-Decker™ frame design

Driveline with slip clutch helps protect it against overloads

Safety chain shields are standard

Standard stump jumper blade holder provides protection against impacts

Warranty

Five-year limited gearbox warranty provided on every John Deere rotary cutter

Specs & Compare

Add Model

Capacity

Tractor compatibility

Hitch

Dimensions

Drivelines

Gearcases

Blades

Wheels

Shielding

Additional information

Key Specs

Offers and Discounts

3.9% APR fixed rate for 24 months†

Up To 20% OFF Rotary Cutter Blades†

12% OFF Select Attachments†

Shop and Buy

Maintenance and Support

You May Also Be Interested In

Number	3
HP rating	Transfer Continuous 89 kW 120 hp Peak 97 kW 130 hp Outer Continuous 56 kW 75 hp Peak 75 kW 100 hp

RC8MRotary Cutter

SHARE

Features

Five-year limited gearbox warranty provided on every John Deere rotary cutter

Specs & Compare

Add Model

Capacity

Tractor compatibility

Hitch

Dimensions

Drivelines

Gearcases

Blades

Wheels

Shielding

Additional information

Key Specs

Offers and Discounts

Related Products

Shop and Buy

Maintenance and Support

You May Also Be Interested In